组播命令汇总

欢迎您访问我爱IT技术网，今天小编为你分享的电脑教程是网络协议方面的经验知识教程：组播命令汇总，下面是详细的分享！

组播命令汇总

组播命令汇总

SUMMARY STEPS

1. enable

2. configure terminal

3. ip multicast-routing [distributed] //启用多播路由后面一条是SW上的

4. interface type number

5. Either perform Steps 6 and 7 and proceed to Step 9 or perform Step 8 and then proceed to Step 9.

6. ip pim sparse-mode ////SP模式

7. ip pim autorp listener /////让SP支持AUTO－RP

8. ip pim sparse-dense-mode ///sp&de模式

9. end

10. Repeat Steps 1 through 9 on all PIM interfaces.

11. ip pim send-rp-announce {interface-type interface-number | ip-address} scope ttl-value [group-list access-list] [intervalseconds] [bidir] ///////C-RP

12. ip pim send-rp-discovery [interface-type interface-number] scope ttl-value [interval seconds] /////////MA

13. ip pim rp-announce-filter rp-list access-list group-list access-list ////RP过滤

14. no ip pim dm-fallback ////防止在SP&DE模式时RP挂了之后回到DE模式

15. interface type number

16. ip multicast boundary access-list [filter-autorp]

17. end

18. show ip pim autorp

19. show ip pim rp [mapping] [rp-address]

20. show ip igmp groups [group-name | group-address | interface-type interface-number] [detail]

21. show ip mroute [group-address | group-name] [source-address | source-name] [interface-type interface-number] [summary] [count] [active kbps]

以上就是关于组播命令汇总的网络协议知识分享，更多电脑教程请移步到>>电脑教程。